JMP is excited to announce our new technical HVAC magazine! It is a great resource to get bite-sized educational pieces similar to the content featured in our seminars. Register to have the latest blog sent to your email address.
We are almost finished building our e-1510 pump curve! In this final blog of our series, we’ll introduce positive suction head (NPSH) to our curve and explain what NPSH is and why it matters....
Read MoreHow can you be certain that the pump you select will not cavitate in the system you are designing? By now it should be clear that such certainty is a matter of analyzing the following variables…
Read MoreIn our previous blog we explained the physics behind that noisy, destructive phenomenon known as cavitation – the result of too little NPSH at the suction of the pump. Today we’re going to dig a little deeper into…
Read MoreAnyone involved in the design or application of fluid pumping systems is familiar with NPSH or Net Positive Suction Head. We typically equate NPSH with one singular question: Is there enough…
Read MoreWhen designing cooling tower suction piping, it is absolutely critical that engineers have sufficient NPSH to the condenser water pump and avoid any piping design errors that could cause air to come out of the pumping solution. If either of these becomes a problem…
Read More
Visit our Contact Page and let us know what information you'd like to receive.
Powered by Squarespace
